Epson 386/25 - Manual (Page 151)

Installing the Drivers
If you have already installed Windows/286 you must reinstall it
along with the new driver. Follow these steps:
1. Run the VGA Driver Setup program on your Utility 1
diskette to copy the Windows/286 drivers to your hard disk.
See “Using the VGA Driver Setup Program” on page A-4
for instructions.
When Setup asks for the name of the drive and directory to
contain the driver files, you can accept the default
pathname or enter a different one.
2. Use the instructions in the Windows/286 documentation
and on your screen to run the Windows/286 setup program.
3. The program displays a list that includes the display adapter,
keyboard type, and mouse that it has detected in your
computer. Press 1 to highlight VGA and press Enter.
4. The program shows a list of display adapters. Press 1 to
highlight
Other and press Enter.
5. Then Setup asks you for the name of the drive and directory
containing the Windows/286 display drivers. Type the
pathname you selected when you ran the VGA Driver Setup
program and press Enter.
6. The setup program asks you to choose a display driver
resolution. Select the driver you want to use and press
Enter. (Be sure that you copied a driver for that resolution
to your hard disk.)
7. Follow the rest of the instructions on the screen and in the
Windows/286 documentation to complete the installation
procedure.
Using the VGA Utilities A-9