Epson 386/25 - Manual (Page 177)

Installing the Drivers
Follow the steps below to install the Epson drivers:
1. If necessary, install Lotus l-2-3 or Symphony on your hard
disk using the instructions in the program manual.
2. Run the VGA Driver Setup program on your Utility 1
diskette to copy the Lotus 1-2-3 and Symphony drivers to
your hard disk. See “Using the VGA Driver Setup Program”
on page A-4 for instructions.
When Setup asks for the name of the drive and directory to
contain the driver files, erase the default name and enter the
directory containing your l-2-3 or Symphony program files.
3. Type C : and press Enter to log onto your hard disk.
4. Log onto the directory containing your Lotus program. (For
l-2-3, type CD \ 123 and press Enter.)
5. To start the installation program, type the following and
press
Enter:
INSTALL
6. You see the Installation menu. Select Advanced
options.
7. Then select Add new drivers to library.
8. Nextchoose Modify current driver set.
9. Select Text display.
Using the VGA Utilities A-35