Grass Valley Newton Modular Control System v.2.0 - Manual (Page 97)

Newton Instruction Manual 97
Newton Panel Description
Rack Mount Panel – Soft Key Setup Assignment
To make soft key setup assignments from the rack mount panel:
1. Scroll to the desired setup you wish to assign to a soft key with the left
and right navigation buttons (arrows) until it appears in the display
(
Figure 84 ).
2. Assign this displayed setup to a soft key by holding down the
Learn/Recall button until the display shows the Press soft key to use with this
setup message.
Figure 84. Delegate Setups to Soft Keys at Rack Mount Panel
3. Press the desired soft key to assign this setup. The display will return
to the assigned setup parameters.
4. Scroll to a different setup, then press the Recall button and the soft key
to verify the correct setup is recalled.
Video
In Gain
Video
HTimg
V
Timing
Bright
Y OFF
Learn/
Recall
Enable
Ident NEWTON
MODULAR CONTROL 8234_00_05r1
Router
Route
Mon
Input Gn 1
100.0
Input Gn 2
100.0
Input Gn 3
100.0
Input Gn 4
100.0
User-defined soft keys Learn/Recall button Navigation buttons