Grass Valley Newton Modular Control System v.2.0 - Manual (Page 84)

84 Newton Instruction Manual
Section 4 — Operation
Identify Button
When the Identify button is selected (high tally or LED on), selecting a
control on the display shows information about the panel controls and the
currently loaded configuration. This includes the function of each button,
the channel name, current setup name, soft key assignments, knob assign-
ment information (if knob is configured) and parameters and ranges of
adjustment. Pushing the rack mount panel knob in while in this mode will
report the current knob configuration settings.
The example in Figure 68 illustrates the Identify button function on the soft-
ware panel with the Learn button selected.
Figure 68. Identify Button Function
On the rack mount panel, select the Ident button (high tally) and operate any
control to display its function or current configuration.
Holding the Ident button down will also display the current software
version loaded on the rack mount panel and the panel IP Address.