Grass Valley Newton Modular Control System v.2.0 - Manual (Page 69)

Newton Instruction Manual 69
Panel Configuration
Soft Keys – Recall Take Router Source
The soft keys can be utilized with the Newton Router Interface option to be
assigned to take specific router sources to the configured Monitor Destina-
tion in the Router Configuration tab.
To set up a router source to be recalled by a soft key, do the following:
1. In the Soft Key Configuration tab of Newton Panel Configurator, select
an unassigned soft key to recall a router source by checking the
Router
SRC on Monitored DST checkbox in the corresponding soft key row to
activate the function. For this example, Soft Key 4 will be used
(
Figure 52 on page 70 ).
2. In the blank enabled field, enter a valid source from the configured
router exactly as the source is named on the router list. The example
will use SRC_14.
3. This source will be taken to the currently selected Monitored
Destination when the
Recall button is on and Soft Key 4 is pressed.
Soft Keys – Recall Select Monitored Router Destination
The soft keys can be utilized with the Newton Router Interface option to be
assigned to select a different monitored router destination than the one
configured in the Router Configuration tab.
To set up a router destination to be selected by a soft key, do the following:
1. In the Soft Key Configuration tab of Newton Panel Configurator, select
an unassigned soft key to select a monitored destination by checking
the
Monitored Router DST checkbox in the corresponding soft key row to
activate the function. For this example, Soft Key 5 will be used
(
Figure 52 on page 70 ).
2. In the blank enabled field, enter a valid destination from the configured
router exactly as the destination is named on the router list. The
example will use D_DST_3.
3. When the Recall button is on and Soft Key 4 is pressed, the Monitored
Destination will be changed to the configured destination.
Soft Keys Summary
The three soft key controls can be set independently as explained in the
above examples or any of the three soft key controls can be configured to
the same soft key. This allows combining the recall of a channel setup,
taking of a router source, and selecting a specific destination in one key
press. This also allows router source/destination control with a single key
press if desired.