Grass Valley Newton Modular Control System v.2.0 - Manual (Page 49)

Newton Instruction Manual 49
Panel Configuration
• New Setup – select this button to name a new setup once a channel has
been defined above. The Enter Name window is identical to Figure 31
on page 48 . Select OK when finished to enter the name in the Setup
Name list under the New Setup button on the main screen.
There is a limit of 12 setups per channel. If the maximum number of
setups are already created, attempting to create a setup will bring up
the warning message shown in
Figure 33 .
Note Creating complex setups can limit the number of channels that can be created
when using more than about 70 channels.
Figure 33. Setup Limit Warning
• Associate Router Source with this setup checkbox – when the Newton Router
Interface option is enabled, any setup can be associated with a router
source. When the router source is selected on the router, this setup will
automatically become active on the Newton control panel.
• Router Source Name – a valid router source must be entered in the field
from the Router configured under the Router Configuration tab.