Grass Valley Newton Modular Control System v.2.0 - Manual (Page 59)

Newton Instruction Manual 59
Panel Configuration
The first setup in the Sat_4 channel will assign the video composite
input gain controls for Channel 1 of the four decoders to the a knob on
the control panel.
6. Scroll down the Module parameter window and find nd select the
vciGain1 control ( Figure 42 ).
7. Right-click anywhere on the highlighted control area to bring up the
knob menu or select the
Configure Knob 1 button under the window. This
assigns Knob 1 to control this parameter and places the vciGain1
parameter information in the Current Configuration area.
Figure 42. Sample Configuration Example
Right-click on control for
knob choices
Highlight control then
select Configure Knob button
Knob 1 assignment
will be displayed