Grass Valley Newton Modular Control System v.2.0 User Manual
Page 53
Newton Instruction Manual
53
Panel Configuration
The Newton Panel area at the bottom of the Newton Panel Configurator
window shown in
allows a configuration to be sent to, or read
from, a panel present on the LAN.
When a panel is dragged and dropped to the Newton Panel area, the fol-
lowing information about the panel is displayed:
•
Panel Name
field– displays the name of the panel that has been dragged
and dropped into the parameter window.
•
Panel IP Address
field – lists the IP Address of the displayed panel.
•
Send to Panel
button – will download the current configuration to the
panel.
•
Read from Panel
button – will upload the configuration from the panel in
the display to the Newton Panel Configurator.
•
Local Panel (NewtonPC)
checkbox – checking this box will connect the
Newton Panel Configurator to the Newton software panel installed on
the resident PC running NetConfig. The IP Address shown is a loop-
back address from the local PC and should not be changed.
Figure 37. Newton Panel Area
Panel IP Address
Panel Name
Read from Panel
button
Send to Panel
button
Local Panel checkbox