Grass Valley Newton Modular Control System v.2.0 - Manual (Page 93)

Newton Instruction Manual 93
Newton Panel Description
In this case, the setup will appear on NewtonPC as shown in Figure 79 and
the Rack Mount panel as shown in Figure 80 when the Monitor button is
selected.
If the user manually changes the panel’s delegation to a setup which does
not match the current source, the
Monitor button tally will turn off. Pressing
the Monitor button again turns on the monitoring function, the button tally
and the panel delegates to a setup which has been assigned to the source.
Note Within a channel if more than one setup is associated with the same source,
the first setup in the channel for that source will be delegated.
Parameters for the setup can now be adjusted using the knobs assigned in
configuration.
Switching to a new router source assigned to a setup will cause the panel
to display a different configured setup.
Figure 79. Newton PC – Monitor Mode
Figure 80. Rack Mount Panel – Monitor Mode
Video
In Gain
Video
HTimg
V
Timing
Bright
Y OFF
Learn/
Recall
Enable
Ident NEWTON
MODULAR CONTROL 8234_00_09
Router
Route
Mon
YOffset1
0.0
YOffset2
0.0
YOffset3
0.0
YOffset4
0.0
Mon button