Grass Valley Newton Modular Control System v.2.0 - Manual (Page 107)

Newton Instruction Manual 107
Newton Panel Description
Enable Soft Key (Recall) mode
When the Recall button is on (enabled), selecting soft keys will recall
user-assigned setups. If soft key assignments have been made in the
Newton Panel Configurator and downloaded to a panel, or made at the
panel after the configuration was downloaded, when the
Recall button on
the panel is enabled, selecting a soft key with a setup, router source, or
router destination (or any combination of these) assigned to it will recall
that setup into the panel display.
Refer to the NewtonPC panel example in Figure 95 . With the Recall button
on, pressing Soft Key 1 will bring up the Video Proc Input Gain setup. This
setup was assigned to Soft Key 1 during the configuration process and
downloaded to the panel.
Figure 95. NewtonPC Soft Key 1 Recall
Recall Soft Key 1