Grass Valley Newton Modular Control System v.2.0 - Manual (Page 25)

Newton Instruction Manual 25
Newton Control Panel Application Installation
Newton Control Panel Application Installation
The NewtonPC software control panel application for the PC comes on a
CD-ROM along with the NetConfig networking tool and the Newton Panel
Configurator necessary for configuring panels.
Installation of the Newton software control panel is a process of installing:
• Newton Control Panel application,
• NetConfig Networking application, and
• Newton Panel Configurator.
These software components are all included in the install process.
Installing NewtonPC Control Panel Application
Install the NewtonPC Control Panel software and additional components
on a networked PC as follows:
1. Insert the NewtonPC CD-ROM into the CD drive in your networked
PC.
2. The setup application should autorun when inserted. If not, locate the
NewtonPC1-Setup.EXE file in the NewtonPC folder and double-click
on it to start the installation.
3. Read the Welcome screen and click on the Next > button ( Figure 6 ).
Figure 6. Installation Welcome Screen