Grass Valley Newton Modular Control System v.2.0 - Manual (Page 38)

38 Newton Instruction Manual
Section 3 — Configuration
4. Select the Discover Devices icon in the upper left corner of the window. All
Newton rack mount panels present on the network should be listed
under the Newton list.
Note Software panels are not seen in the tree structure.
5. Locate the Newton rack mount panel you want to configure. New
panels will appear with a red indicator dot, showing a default IP
Address.
6. Highlight the Newton rack mount panel name. The Newton Panel
Description page (
Figure 21 ) will come up and display read-only
information about the panel. This page also provides links to other
panel pages.
Figure 21. Locating Newton Panels With NetConfig
Discover Devices icon
IP, Device and
Facility icons
Device View