Grass Valley Newton Modular Control System v.2.0 - Manual (Page 62)

62 Newton Instruction Manual
Section 3 — Configuration
In the example shown in Figure 46 , Setup 4, Brightness_Y Offset has been
associated with Router source, SRC_3 for the configured router. When this
source is selected on the router, and the
Monitor button is selected on the
control panel, this Newton Control Panel will be delegated to this setup
and the controls can be adjusted using the control panel knobs assigned.
Any setup can be associated with a router source as long as the source
name matches a source in the router list.
Figure 46. Associate Router Source with Setup
Brightness/Y Offset setup
knob assignments
Associate setup with
router source.