Learn/recall button(s), Learn button – Grass Valley Newton Modular Control System v.2.0 User Manual

Page 95

Newton Instruction Manual

Newton Panel Description

Learn/Recall Button(s)

The

Learn/Recall

button on the rack mount panel and the

Learn

and

Recall

buttons on the NewtonPC software panel control the operating state of the
12 soft keys on the panel.

Learn Button

The

Learn

button enables the soft key assignment mode. When the

Learn

button green LED is lit on the soft panel or the

Learn/Recall

button is held

down on the rack mount panel, you may learn the present setup or a router
source or monitored destination selection to one of the soft key buttons on
the panel.

With a soft key selected, holding the

Learn/Recall

button on the rack mount

panel until the tally light goes out will erase the current soft key assignment
on that button.

Soft key assignments can be made during configuration and downloaded
to a panel or be made directly from the panel and uploaded to the Newton
Panel Configurator to be saved to a file.

Refer to

Soft Key Functions and Assignments on page 65

for the soft key

assignment steps using the Newton Panel Configurator.

To upload and save any soft key assignments to the Newton Panel Config-
urator, refer to

Upload Soft Key Assignments to Newton Panel Configurator on

page 104

Note

Soft key assignments made at the panel are saved on the panel until down-
loaded with another configuration.

This section describes using the software and rack mount control panels to
assign soft keys to the following,:

•

Setups (