Grass Valley K2 Media Client System Guide v.3.3 - Manual (Page 76)

76 K2 Media Client System Guide June 9, 2009
Chapter 3 System connections and configuration
a. Click the Adapter Name.
b. Select File | Rename to enter rename mode.
c. Type FTP Team .
4. Ensure that eight entries are named as follows in Network Properties:
Continue with the next procedure “Reorder adapters” .
Reorder adapters
1. On the Windows desktop right-click My Network Places and select Properties . The
Network Connections window opens.
2. On the menu bar at the top of the window, select Advanced , then Advanced
Settings…
3. On the Adapters and Bindings tab, depending on the K2 Media Client’s storage,
order adapters as follows:
4. Click OK to close Advanced settings and accept the changes.
Name Device Name
…Connection #1 TEAM : Control Team - Intel® PRO/1000 MT Dual Port Server Adapter (Type 1 MB)
-or-
TEAM : Control Team - Intel® PRO/1000 EB Network Connection… (Type II MB)
…Connection #2 TEAM : Control Team - Intel® PRO/1000 MT Dual Port Server Adapter #3 (Type 1 MB)
-or-
TEAM : Control Team - Intel® PRO/1000 MT Dual Port Server Adapter (Type II MB)
Control Team TEAM : Control Team
…Connection #3 Team : DO NOT USE
a
a. This team only on K2 Media Clients shipping before system software version 3.2.5x.
Loopback Microsoft Loopback Adapter
Media Connection #1 TEAM : Media Team - Intel® PRO/1000 MT Dual Port Server Adapter #2 (Type 1 MB)
-or-
TEAM : Media Team - Intel® PRO/1000 EB Network Connection…#2 (Type II MB)
Media Connection #2 TEAM : Media Team - Intel® PRO/1000 MT Dual Port Server Adapter #4 (Type 1 MB)
-or-
TEAM : Control Team - Intel® PRO/1000 MT Dual Port Server Adapter #2 (Type II MB)
Internal storage
unteamed Internal storage
teamed Direct-connect
storage Shared (SAN) storage
Loopback Loopback Loopback Control Team
Control Connection #1 Control Team Control Connection #1 Media Connection #1
Control Connection #2 FTP Team Media Connection #1 Media Connection #2
Media Connection #1 — — Loopback
Media Connection #2 — — —