Grass Valley K2 Media Client System Guide v.3.3 - Manual (Page 127)

June 9, 2009 K2 Media Client System Guide 127
Chapter
5
Managing K2 client system software
This chapter contains the following topics:
• “About K2 Media Client system software”
• “Installing Control Point software”
• “Installing K2 software”
• “Backup and recovery strategies”
About K2 Media Client system software
Check K2 Release Notes for the latest information about software.
At the time of this writing, the primary software installations for the K2 Media Client
and K2 products are as follows:
This
software… Is distributed
on…
With the installation file located at…
Which is
installed on… And is described as
follows:
K2 Client The K2 System
Software CD ..\K2Client\setup.exe K2 Media
Clients Provides core functionality
for all K2 Media Client
models, including SDA-00,
SD-00, HD-00, internal
storage, and external
storage models.
K2 Server The K2 System
Software CD ..\K2Server\setup.exe K2 Media
Servers Provides core functionality
for all K2 Media Servers in
all roles.
Control
Point The K2 System
Software CD ..\ControlPoint\setup.exe Control Point
PCs Provides remote control
and configuration of K2
Media Clients (both
internal and external
storage) as well as the K2
Storage System.
Media File
System
(SNFS) The K2 System
Software CD ..\snfs\gvSnfsxxSetupK2.bat K2 Media
Servers,
stand-alone K2
Media Clients,
and shared
storage (SAN)
K2 Media
Clients Provides a dedicated file
system for access to media
data. Install only as
instructed by release notes.
NetCentral The NetCentral
Manager CD ..\ServerSetup.exe The NetCentral
server PC (this
can be a
Control Point
PC) Provides remote
monitoring of all K2
products.