Grass Valley K2 Media Client System Guide v.3.3 - Manual (Page 40)

40 K2 Media Client System Guide June 9, 2009
Chapter 1 Product Description
Ports used by K2 services
The following ports are used by the applications and system tools of the K2 family of
products:
Port # Type of
connection Service name Description
3389 TCP Remote Desktop Used by SiteConfig.
18262 TCP GV ProductFrame
Configuration Service,
ProductFrame
Discovery Agent
Service Used by SiteConfig.
18263 UDP ProductFrame
Discovery Agent
Service GV NetConfig Device Broadcast/Unicast
Protocol. Used by SiteConfig. Sent by
ControlPoint, received by Devices
18264 UDP ProductFrame
Discovery Agent
Service GV NetConfig Controller Protocol. Used by
SiteConfig. Sent by Devices, received by
ControlPoint
49168 HTTP Grass Valley
K2 Config K2 System Configuration application connection
between a Control Point PC and the K2 Storage
System device configured. Both HTTP and TCP
connections are required. Most functions use the
HTTP connection, but a few functions that
require longer time periods use TCP.
49169 TCP
49170 HTTP Grass Valley
Transfer Queue Service Transfer Manager connection between source
system and destination system.
49171 TCP Grass Valley
AppService AppCenter connection for connection between
Control Point PC and K2 Media Client.
49172 HTTP Grass Valley
Storage Utility Host Connection for Storage Utility between Control
Point PC and K2 Media Client or K2 Media
Server.