Ingesting sdi, Afd input/output settings, Appendix b specifications – Grass Valley K2 Media Client System Guide v.3.3 User Manual
Page 202
202
K2 Media Client System Guide
June 9, 2009
Appendix B Specifications
Ingesting SDI
An SDI video signal stores AFD in the vertical ancillary data. If present, the AFD
setting from two seconds into the file is copied into the clip properties. (If selected,
the ANC data is copied into the K2 data track.)
AFD input/output settings
The following table shows the various AFD input settings, and the resulting output
values.
Input and Settings
Output AFD Value
AFD set in
the clip
properties
AFD
already
in the
data
Track
ARC
Performed
AFD in
Config
Mgr
setting
AFD set
in Clip
property
Translated
from the
clip
property
according
to the ARC
performed
a
a
For a list of supported AFD conversions, see
“Supported conversions from SD to HD using AFD” on
page 207
and
“Supported conversions from HD to SD using AFD” on page 207
.
Same as
data
track
settings
Translated
from AFD
values on
the data
track
a
No
AFD
Default
AFD
b
b
For a list of default AFD settings, see
“Default generated AFD values” on page 204
.
n/a
Y
n/a
Never
X
Y
n/a
N
Always or
When
Known
X
Y
n/a
Y
Always or
When
Known
X
N
Y
N
Always or
When
Known
X
N
Y
Y
Always or
When
Known
X
N
N
n/a
Always
X
N
N
n/a
When
Known
X
n/a
N
n/a
Never
X