Grass Valley K2 Media Client System Guide v.3.3 - Manual (Page 190)

190 K2 Media Client System Guide June 9, 2009
Appendix B Specifications
Composite Analog Video - SDA-00 models
The K2 Media Client specification is shown in the following table.
Genlock Reference
The K2 Media Client specification is shown in the following table.
Parameter Specification
Composite Video Standard
a
a
Can record signals from most non-timebase corrected signal sources such as color under video playback
devices, e.g. VHS or U-Matic VTRs, and low cost cameras. However, for reliable recording performance
some devices may require external signal conditioning products, e.g. timebase correction.
NTSC, 525 line (59.94Hz) Conforms to SMPTE170M, or
PAL, 625 line (50Hz) Conforms CCIR Report 624
Number of Inputs 1 per record channel
Number of Outputs 1 per play channel
Connectors BNC, 75 ohm
Characteristic Description
Signal Type NTSC/PAL Color Black Composite Analog
Connectors 2 BNC, 75 ohm passive loop through
Burst Frequency Lock Range PAL, ±10 Hz at subcarrier
NTSC, ±20 Hz at subcarrier
Signal Amplitude Lock Range Stays locked to +6 dB and -3 dB
Input Return Loss ≥40 dB to 5 MHz
Tri-level sync Not supported