Grass Valley K2 Media Client System Guide v.3.3 - Manual (Page 38)

38 K2 Media Client System Guide June 9, 2009
Chapter 1 Product Description
Locations of rear panel boards
Boards are mapped to rear panel slots as follows. When viewed from the rear, slot 1
is on the right and slot 7 is on the left.
Type I motherboard
Type II motherboard
Type III motherboard
Slot SDA-00 and SD-00 HD-00 Comments
1 — — —
2 Dual Ethernet or
Fibre Channel (optional) RTP Plugs into a PCI bus.
3 USB RS-422 dual-port USB RS-422 dual-port Occupies a rear panel slot but
does not plug into a PCI bus.
4 Graphics Graphics Plugs into a PCI bus.
5 RTP Dual Ethernet or
Fibre Channel (optional) Plugs into a PCI bus.
6 RAID controller RAID controller Plugs into a PCI bus.
7 USB RS-422 dual-port USB RS-422 dual-port Occupies a rear panel slot but
does not plug into a PCI bus.
Slot SDA-00 and SD-00 HD-00 Comments
1 Fibre Channel (optional) Fibre Channel (optional) Plugs into a PCI bus.
2 Dual Ethernet RTP Plugs into a PCI bus.
3 PCI RS-422 8 port PCI RS-422 8 port Plugs into a PCI bus.
4 Graphics Graphics Plugs into a PCI bus.
5 RTP Dual Ethernet Plugs into a PCI bus.
6 RAID controller RAID controller Plugs into a PCI bus.
7 — — Plugs into a PCI bus.
Slot SDA-00 and SD-00 HD-00 Comments
1 USB RS-422 dual-port USB RS-422 dual-port Occupies a rear panel slot but
does not plug into a PCI bus.
2 Dual Ethernet RTP Plugs into a PCI bus.
3 Fibre Channel (optional) Fibre Channel (optional) Plugs into a PCI bus.
4 Graphics Graphics Plugs into a PCI bus.
5 RTP Dual Ethernet Plugs into a PCI bus.
6 RAID controller RAID controller Plugs into a PCI bus
a
.
a.
This board not present on some external storage models.
7 USB RS-422 dual-port USB RS-422 dual-port Occupies a rear panel slot but
does not plug into a PCI bus.