Grass Valley K2 Media Client System Guide v.3.3 - Manual (Page 107)

June 9, 2009 K2 Media Client System Guide 107
Pinnacle support
ftp> put std /MPG/V:/default/646405_IMX30_ MXF_IPN
200 PORT command okay.
150 Opening MOVIE mode data connection for /
explodedFile/V:/default/646405_IMX30_ MXF_IPN.
226 Transfer complete.
ftp: 54547968 bytes sent in 14.05Seconds 3883.25Kbytes/
sec.
ftp> quit
221 Goodbye.
Importing via Pinnacle emulation K2 FTP
1. With your third-party automation vendor or FTP client, connect to the K2 FTP
server as follows:
• FTP username: vf_server
• FTP password: .vf_server
The username and password are case sensitive.
2. Create a directory named for the Pinnacle clip.
3. Put the following Pinnacle clip files in the directory in the following order:
header
ft
info (optional)
std
Use the following example as a guideline:
J:\>ftp mx-proto-b14
Connected to mx-proto-b14.
220 FTP Server (1, 0, 0, 1) ready.
User (mx-proto-b14:(none)): video_fs
331 Password required for user video_fs.
Password:
230 Logged in, and aspect successfully set to MOVIE,
stream mode PIN.
ftp> bin
200 Type set to IMAGE.
ftp> mkdir pinnacle_clip
250 Command “XMKD pinnacle_clip” succeeded.
ftp> cd pinnacle_clip
250 Change of directory to explodedFile/V:/default/
pinnacle_clip successful, xfer mode PIN.