Grass Valley K2 Media Client System Guide v.3.3 - Manual (Page 75)

June 9, 2009 K2 Media Client System Guide 75
Name teams
9. On the Adapters tab, do the following:
a. Select the top entry, which is Intel® PRO/1000 MT Dual Port Server Adapter #2
(Type I MB) or Intel® PRO/1000 EB Network Connection with I/O Acceleration #2
(Type II MB), and click Set Primary .
b. Select the bottom entry, which is Intel® PRO/1000 MT Dual Port Server Adapter
#4 (Type I MB) or Intel® PRO/1000 MT Dual Port Server Adapter #2 (Type II MB)
and click Set Secondary .
10.Click Name tab and rename to FTP Team, if not already named.
11.Click OK and OK and to close dialog boxes.
12.Restart the K2 Media Client.
Continue with the next procedure “Name teams” .
Name teams
This procedure applies only to internal storage K2 Media Clients on which you have
created a Control Team and a FTP Team, as instructed in previous procedures.
1. On the Windows desktop right-click My Network Places and select Properties . The
Network Connections window opens.
2. Identify the adapter that in the “Device Name” column is labeled “TEAM : Control
Team”. Rename the adapter follows:
a. Click the Adapter Name.
b. Select File | Rename to enter rename mode.
c. Type Control Team .
3. Identify the adapter that in the “Device Name” column is labeled “TEAM : FTP
Team”. Rename the adapter follows: