Grass Valley K2 Media Client System Guide v.3.3 - Manual (Page 171)

June 9, 2009 K2 Media Client System Guide 171
Appendix
A
Remote control protocols
This section provides information for using remote control protocols to operate K2
Media Clients. It is intended for use by installers, system integrators, and other
persons responsible for setting up automation systems at a customer site. Topics are
provided as follows:
• “Using AMP protocol to control K2 systems”
• “Using VDCP protocol to control K2 systems”
• “Using BVW protocol to control K2 systems”
• “Special considerations for automation vendors”
• “RS-422 connections”
• “Security and protocol control”
For information about configuring AppCenter to enable protocol control of a K2
Media Client channel, refer to the K2 Media Client User Manual.