H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 74)

64
Task Remarks
Enabling the spanning tree feature Required
Configuring the leaf
nodes
Setting the spanning tree mode
Required
Configure the device to
operate in RSTP mode.
Configuring the device priority Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring edge ports Optional
Configuring path costs of ports Optional
Configuring the port priority Optional
Configuring the port link type Optional
Configuring the mode a port uses to recognize/send
MSTP packets
Optional
Enabling outputting port state transition information Optional
Enabling the spanning tree feature Required
Performing mCheck Optional
Configuring protection functions Optional
Complete the following tasks to configure MSTP:
Task Remarks
Configuring the root
bridge
Setting the spanning tree mode
Optional
By default, the device
operates in MSTP mode.
Configuring an MST region Required
Configuring the root bridge or a secondary root
bridge
Optional
Configuring the device priority Optional
Configuring the maximum hops of an MST region Optional
Configuring the network diameter of a switched
network
Optional
Configuring spanning tree timers Optional
Configuring the timeout factor Optional
Configuring the maximum port rate Optional
Configuring edge ports Optional
Configuring the port link type Optional
Configuring the mode a port uses to recognize/send
MSTP packets
Optional
Enabling outputting port state transition information Optional