H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 112)

102
Step Command Remarks
3. Configure the negotiation
timeout time.
ppp timer negotiate seconds
Optional.
3 seconds by default.
Configuring IP address negotiation
Configuring the local end as the client
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Enable IP address
negotiation.
ip address ppp-negotiate N/A
Configuring the local end as the server
To configure the local end as the server (for cases where PPP authentication is not enabled):
Step Command Remarks
1. Enter system view. system-view N/A
2. Assign an IP address of a global
address pool to the peer or
specify the IP address to be
allocated to the peer.
• Approach 1:
Define a global address pool
and bind it to the interface:
a. ip pool pool-number
low-ip-address
[ high-ip-address ]
b. interface interface-type
interface-number
c. remote address pool
[ pool-number ]
• Approach 2:
Specify the IP address to be
allocated to the peer:
a. interface interface-type
interface-number
b. remote address
ip-address
Use either approach.
As for the remote address pool
command, if the pool-number
argument is not provided, the
global address pool numbered 0
is used.
To configure the local end as the server (for cases where PPP authentication is enabled):
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter domain view. domain domain-name N/A
3. Define the domain address
pool.
ip pool pool-number low-ip-address
[ high-ip-address ]
N/A