H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 126)

116
Configuration procedure
Configuring L2 switch
# Create VLAN 1001.
system-view
[L2 switch] vlan 1001
[L2 switch-vlan1001] quit
# Configure GigabitEthernet 1/0/1 as an access port, and configure the port to permit packets from
VLAN 1001 to pass through.
[L2 switch] interface GigabitEthernet 1/0/1
[L2 switch-GigabitEthernet1/0/1] port link-type access
[L2 switch-GigabitEthernet1/0/1] port access vlan 1001
[L2 switch-GigabitEthernet1/0/1] quit
# Configure GigabitEthernet 1/0/2 as a trunk port, and configure the port to send the packets from
VLAN 1001 with VLAN tags kept.
[L2 switch] interface GigabitEthernet 1/0/2
[L2 switch-GigabitEthernet1/0/2] port link-type trunk
[L2 switch-GigabitEthernet1/0/2] port trunk permit vlan 1001
[L2 switch-GigabitEthernet1/0/2] quit
Configuring L3 switch
# Create VLAN 100.
system-view
[L3 switch] vlan 100
[L3 switch-vlan100] quit
# Configure GigabitEthernet 1/0/5 as an access port, configure the port to permit packets from VLAN
100 to pass through, and enable QinQ on the port.
[L3 switch] interface GigabitEthernet 1/0/5
[L3 switch-GigabitEthernet1/0/5] port link-type access
[L3 switch-GigabitEthernet1/0/5] port access vlan 100
[L3 switch-GigabitEthernet1/0/5] qinq enable
[L3 switch-GigabitEthernet1/0/5] quit
# Configure GigabitEthernet 1/0/6 as a trunk port, and configure the port to send the packets from
VLAN 100 with VLAN tags kept.
[L3 switch] interface GigabitEthernet 1/0/6
[L3 switch-GigabitEthernet1/0/6] port link-type trunk
[L3 switch-GigabitEthernet1/0/6] port trunk permit vlan 100
[L3 switch-GigabitEthernet1/0/6] quit
Configuring AC
# Create VLANs 100, 1001, 200, and 2001.
system-view
[AC] vlan 100
[AC-vlan100] vlan 1001
[AC-vlan1001] vlan 200
[AC-vlan200] vlan 2001
[AC-vlan2001] quit