beautypg.com

H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 117

background image

107

Step Command

Remarks

1.

Enter system view.

system-view

N/A

2.

Create a VT interface.

interface virtual-template number

This operation also leads you to VT
interface view.

3.

Set PPP parameters (including
authentication type, IP

address negotiation, and so

on); specify the IP address to
be allocated to the peer or

define an IP address pool

(optional).

See "

Configuring PPP

." Optional.

4.

Enter VLAN interface view.

interface vlan-interface
vlan-interface-id

N/A

5.

Enable PPPoE on the VLAN

interface.

pppoe-server bind virtual-template
number

Disabled by default.

6.

Return to system view.

quit

N/A

7.

Set the maximum number of

PPPoE sessions allowed with
regard to a peer MAC

address.

pppoe-server max-sessions
remote-mac number

Optional.
100 by default.

8.

Set the maximum number of

PPPoE sessions allowed with
regard to the local MAC

address.

pppoe-server max-sessions

local-mac number

Optional.
100 by default.

9.

Set the maximum number of

PPPoE sessions allowed.

pppoe-server max-sessions total
number

Optional.
The maximum number of PPPoE
sessions allowed varies by device.

10.

Set the upper threshold for the
PPPoE abnormal offline event

count.

pppoe-server
abnormal-offline-count threshold

number

Optional.
65535 by default.
If the PPPoE abnormal offline event
count in the last five minutes

exceeds this threshold, the system
outputs a trap message.

11.

Set the upper threshold for the
PPPoE abnormal offline event

percentage.

pppoe-server
abnormal-offline-percent threshold

number

Optional.
100 by default.
If the PPPoE abnormal offline event
percentage in the last five minutes

exceeds this threshold, the system

outputs a trap message.

12.

Set the lower threshold for the
PPPoE normal offline event

percentage.

pppoe-server
normal-offline-percent threshold

number

Optional.
0 by default.
If the PPPoE normal offline event
percentage in the last five minutes

is lower than this threshold, the
system outputs a trap message.

13.

Configure authentication and

accounting on PPP users.

See Security Configuration Guide. Optional.