H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 44)

34
Step Command Remarks
2. Add or modify a
dynamic or static MAC
address entry.
mac-address { dynamic | static } mac-address
interface interface-type interface-number vlan
vlan-id
Use either command.
Make sure that you have
created the VLAN and
assign the interface to the
VLAN.
3. Add or modify a
blackhole MAC address
entry. mac-address blackhole mac-address vlan vlan-id
Add or modify a static or dynamic MAC address table entry on an interface
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter interface view.
interface interface-type
interface-number
N/A
3. Add or modify a static or
dynamic MAC address entry. mac-address { dynamic | static }
mac-address vlan vlan-id
Make sure that you have created
the VLAN and assign the interface
to the VLAN.
Disabling MAC address learning
You may need to disable MAC address learning sometimes to prevent the MAC address table from being
saturated, for example, when your device is being attacked by a large amount of packets with different
source MAC addresses.
Disabling global MAC address learning
Disabling global MAC address learning disables the learning function on all ports.
To disable MAC address learning:
Step Command Remarks
1. Enter system view. system-view N/A
2. Disable global MAC address
learning.
mac-address mac-learning disable Enabled by default.
Disabling MAC address learning on ports
After enabling global MAC address learning, you may disable the function on a single port, or on all
ports in a port group as needed.
To disable MAC address learning on an interface or a port group:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable global MAC address
learning. undo mac-address
mac-learning disable
Optional.
Enabled by default.