H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 119)

109
[AC] local-user user1
[AC-luser-user1] password simple pass1
[AC-luser-user1] service-type ppp
[AC-luser-user1] quit
# Configure virtual-template 1 on the AC.
[AC] interface virtual-template 1
[AC-Virtual-Template1] ppp authentication-mode chap domain system
[AC-Virtual-Template1] ppp chap user user1
[AC-Virtual-Template1] remote address pool 1
[AC-Virtual-Template1] ip address 1.1.1.1 255.0.0.0
[AC-Virtual-Template1] quit
# Configure PPPoE server on the AC.
[AC] interface Vlan-interface1
[AC- Vlan-interface1] pppoe-server bind virtual-template 1
[AC- Vlan-interface1] quit
# Configure local authentication for the users in the default ISP domain system.
[AC] domain system
[AC-isp-system] authentication ppp local
# Add a local IP address pool.
[AC-isp-system] ip pool 1 1.1.1.2 1.1.1.10
• Configure MS-CHAP authentication:
# Add a PPPoE user.
system-view
[AC] local-user user1
[AC-luser-user1] password simple pass1
[AC-luser-user1] service-type ppp
[AC-luser-user1] quit
# Configure virtual-template 1 on the AC.
[AC] interface virtual-template 1
[AC-Virtual-Template1] ppp authentication-mode ms-chap domain system
[AC-Virtual-Template1] remote address pool 1
[AC-Virtual-Template1] ip address 1.1.1.1 255.0.0.0
[AC-Virtual-Template1] quit
# Configure the PPPoE server on the AC.
[AC] interface Vlan-interface1
[AC- Vlan-interface1] pppoe-server bind virtual-template 1
[AC- Vlan-interface1] quit
# Configure local authentication for the users in the default ISP domain system.
[AC] domain system
[AC-isp-system] authentication ppp local
# Add a local IP address pool.
[AC-isp-system] ip pool 1 1.1.1.2 1.1.1.10
Verification
After the configuration, the PPPoE clients can access the Internet by using the username user1 and
password pass1 through the AC if they have PPPoE client software installed.