H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 109)

99
Configuring CHAP authentication when no authenticator name
is configured
Configuring the authenticator
Step Command Remarks
1. Enter system view. system-view N/A
2. Create a VT interface and enter its
view. interface virtual-template
interface-number
N/A
3. Configure the local device to
authenticate the peer by using
CHAP.
ppp authentication-mode chap
[ [
call-in ] domain isp-name ]
By default, PPP
authentication is disabled.
4. Return to system view. quit N/A
5. Create a local user account for the
authenticatee and enter local user
view. local-user username N/A
6. Set the password for the local user. password { cipher | simple }
password
N/A
7. Set the service type of the local
user to PPP.
service-type ppp N/A
8. Return to system view. quit N/A
9. Create an ISP domain, or enter an
existing ISP domain view.
domain isp-name
Optional.
To configure the ppp
authentication-mode
command with an ISP
domain specified which is
not the default domain
system, configure this
command before
configuring the ppp
authentication-mode
command.
10. Configure local authentication for
the PPP users.
authentication ppp local Optional.
For more information about local user configuration and domain configuration, see Security
Configuration Guide.
Configuring the authenticatee
Step Command Remarks
1. Enter system view. system-view N/A
2. Create a VT interface and
enter its view. interface virtual-template
interface-number
N/A