Performing mix takes, Clean switch required, To perform a mix take – Ensemble Designs BrightEye NXT 410 Clean HDMI Router User Manual
Page 88
www.ensembledesigns.com
Page 88
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
Performing Mix Takes
Clean Switch Required
In order to perform a Mix take, the destination must have a Clean Switch assigned to it. (BrightEye
NXT 410, BrightEye NXT 410-H and BrightEye NXT 430 only.) When a Clean Switch is assigned to a
destination, the thumbnail of the destination in the web browser has CS1 or CS2 in its footer:
To Perform a Mix Take
1. Select the thumbnail for the destination.
2. Select the thumbnail for the source. The lower right corner of the web browser interface shows the
Mix Duration indicator and the Mix button.
Note that you can modify the mix duration by entering a new number (5 to 999) in the mix
duration box.
3. Select Mix. The source is mixed to the destination with the specified mix duration. When
applicable, the audio output will properly mix between the adjusted audio settings of one input to
the adjusted audio settings of the new source.