Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 52)

www.ensembledesigns.com Page 52
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
To Set the TSG Vertical Timing
1. Press the Configuration button. The top level menus display.
2. Use the up or down arrow buttons to select the top level menu for
TSG1 or TSG2.
3. Press the right arrow button (or OK) to access the TSG submenus.
4. Use the up or down arrow buttons to highlight the V Timing
submenu.
5. Press the right arrow button (or OK) to access the V Timing
selection submenu.
6. Press the up or down arrow buttons to set the lines value you want
to use. If you want to reset V Timing to zero, press both the up and
down arrow buttons simultaneously.
7. Press OK to set your V Timing selection, or press the Configuration
button to cancel your selection.
8. Press the Configuration button to back out of the menu one
level at a time. Or wait approximately 30 seconds until the screen
automatically returns to Operational mode.
To Set the TSG Horizontal Timing
1. Press the Configuration button. The top level menus display.
2. Use the up or down arrow buttons to select the top level menu for
TSG1 or TSG2.
3. Press the right arrow button (or OK) to access the TSG submenus.
4. Use the up or down arrow buttons to highlight the H Timing
submenu.
5. Press the right arrow button (or OK) to access the H Timing
selection submenu.
6. Press the up or down arrow buttons to set the clocks value you
want to use. If you want to reset H Timing to zero, press both the
up and down arrow buttons simultaneously.
7. Press OK to set your H Timing selection, or press the Configuration
button to cancel your selection.
8. Press the Configuration button to back out of the menu one
level at a time. Or wait approximately 30 seconds until the screen
automatically returns to Operational mode.