Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 50)

www.ensembledesigns.com Page 50
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
Working with the Internal Test Signal Generators
The BrightEye NXT Compact Router is equipped with two independent internal Test Signal Generators
(TSG). These generators are driven from the genlock source chosen by the Reference Source control on
the Timing and Genlock menu.
Each TSG can be independently configured for format, Router Front Panel rate, and test pattern. The
TSG outputs will always be clock-locked to the reference source. Further, they will be vertically locked
and timed if the video standard the TSG is configured for is compatible with the provided reference.
Because the BrightEye NXT Router generates the test signals internally, the TSGs are available as
sources in the Router (without consuming a physical input BNC) and can be selected to any output
destination. Source names can be assigned to them in the Port Configuration menu, and their position
on control panels is assigned in the Profiles menu.
Configuring the Internal Test Signal Generators from the Front Panel
There are two sets of configuration controls, one for each TSG, for both the BrightEye NXT front panel
and the web interface. These configurations are independent, allowing the two generators to operate
in different formats, and even at different frame rates. To configure them to the same standard, and to
set them to matching timing (relative to the genlock reference), make the same settings for Standard,
Vertical Timing, and Horizontal Timing.
Internal
Precision
Reference
Slate/
Cyclops
Test Sig
Gen 2
Slate/
Cyclops
Test Sig
Gen 1
Audio
Embed
Audio
Embed
Tone
Gen
Genlock
Master
Reference
Input