Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 108)

www.ensembledesigns.com Page 108
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
Take Command
Description: This command requests a Take of a previously set preset source to the specified
destination.
Syntax:
Message
Header:
Cmd Data:
T
T ASCII character ‘T’ identifies this as Take cmd.
High byte of Destination number.
Any valid ASCII hex digit. (E.g. ‘0’ to ‘9’ or ‘A’ to ‘F’).
Low byte of Destination number.
Any valid ASCII hex digit. (E.g. ‘0’ to ‘9’ or ‘A’ to ‘F’).
Example: Request a Take of the previous set preset source to Destination 4.
Request: In Hex 0D 30 30 30 33 54 30 34
In ASCII 00 03 T 04 (spaces for readability only)
Response: No serial response. If a preset source had previously been set for Destination 4, the
router now switches that source to Destination 4.