Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 54)

www.ensembledesigns.com Page 54
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
To Configure the TSG Cyclops
1. Press the Configuration button. The top level menus display.
2. Use the up or down arrow buttons to select the top level menu for
TSG1 or TSG2.
3. Press the right arrow button (or OK) to access the TSG submenus.
4. Use the up or down arrow buttons to highlight the Cyclops
submenu.
5. Press the right arrow button (or OK) to access the Cyclops selection
submenu.
6. Press the up or down arrow buttons to select one of these options:
Off, Cyclops Only, Cyclops Aud Pop, Cyclops Aud Beep.
7. Press OK to set your Cyclops selection, or press the Configuration
button to cancel your selection.
8. Press the Configuration button to back out of the menu one
level at a time. Or wait approximately 30 seconds until the screen
automatically returns to Operational mode.
To Configure the TSG Audio Reference Level
1. Press the Configuration button. The top level menus display.
2. Use the up or down arrow buttons to select the top level menu for
TSG1 or TSG2.
3. Press the right arrow button (or OK) to access the TSG submenus.
4. Use the up or down arrow buttons to highlight the Audio Ref Level
submenu.
5. Press the right arrow button (or OK) to access the Audio Ref Level
selection submenu.
6. Use the up or down arrow buttons to select either -20 dBFS or
-18 dBFS.
7. Press OK to set your selection.
8. Press the Configuration button to back out of the menu one
level at a time. Or wait approximately 30 seconds until the screen
automatically returns to Operational mode.