Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 69)

www.ensembledesigns.com Page 69
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
Configuring Additional Control Points
For control points such as iPads and web browsers, there are two methods for adding them. One
method is to request access from a Control Point. The other method is to assign an IP address to a
Control Point.
First Method: Requesting Access from a Desired Control Point
1. From the desired control point, whether from an iPad or from a computer web browser, enter
the Router's IP address (for example, http://10.123.131.158/) into the browser's address field. A
browser window displays indicating that a Control Point is Needed.
2. Enter your desired Control Point name in the Control Point Name field, then click Request. The
browser window indicates that your Control Point has been disabled. Your request has become a
Pending Authorization item for the administrator.
Second Method: Assigning an IP Address From the Admin Control Point
To assign the IP address of a device to create a Control Point:
1. From the Admin Control Point, navigate to the IP address of the BrightEye NXT.
2. In the upper left area, click Settings. The Settings page displays.
3. From the left navigation panel, click Control Points. The Control Points page displays.
4. Under the heading Add Control Points, indicate a name in the Name field.
5. Select a profile from the Profile drop-down control.
6. Enter the IP address for the device into the Address field.
7. Click Add. The Control Points page refreshes to show that the newly assigned Control Point is
enabled.
Approving Pending Authorizations
To approve an authorization request:
1. Click Settings in the upper left area of the browser.
2. Click Control Points in the left navigation panel. The Control Points page displays.
3. Under Pending Authorizations, you will see the request that was just submitted.
4. For this new request, select a Profile from the drop-down control.
5. Click Authorize. The Control Points page refreshes and now includes the newly requested Control
Point.
Note: In order to access Settings, you must have administrator access. See Security and
Administrative Access to Settings on page 78 for more details.