Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 111)

www.ensembledesigns.com Page 111
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
Router Responses
All commands sent to the BrightEye NXT Router must be terminated with a carriage return character
(0DH). Upon receiving a carriage return, the BrightEye NXT Router will send a response to the
automation system.
The possible responses are a simple Prompt Response or a Status Response followed by a Prompt
Response. These are discussed below.
Prompt Response
This response consists of the single ASCII character ‘>’ (3EH).
The BrightEye NXT Router will send this response anytime it receives a carriage return. This is an
indication to the automation system that the router is ready for the next command.
If a command is sent to the BrightEye NXT Router that requires a more extensive response, the Prompt
Response will be sent immediately following the more extensive response.