Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 27)

www.ensembledesigns.com Page 27
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
Router Configuration Menus
Two sets of configuration menus are available—one through the front
panel, the other through the web interface. An overview of these
respective sets of menus are given on this page and on page 29.
Menus Accessed from the Front Panel
Panel Config Shortcuts, Transition Duration, Direct Take or
Preset/Take, Panel Brightness, Audio Meters,
Meter Reference Level, Peak Display, Live
Video On or Muted
Ports Define ports according to port type, edit
port names, adjust audio levels and audio
mapping
TSG1 Select a test signal, choose its standard,
adjust test signal output timing
TSG2 Same as test signal generator 1, but for the
2nd TSG
Clean Switch 1 Set the clean switch’s standard and assign
it to an output, choose audio breakaway
settings. 410 and 430 units only.
Clean Switch 2 Same as Clean Switch 1, but for the 2nd Clean
Switch
Timing & Genlock Select between external and internal
reference, get info about the system frame
rate (determined by TSG1)
Network Change the router’s IP address and other
network settings