Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 68)

www.ensembledesigns.com Page 68
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
Establishing Additional Web Control Points and Access
Authentication
Now that you have established an initial web control point, you can create additional web control
points if you need them. Access can be controlled through using a password as discussed shortly.
Profile assignments also control which sources and destinations any given web control point may
access.
In order to manage web access, each possible Control Point must be authenticated.
An administrator grants access to Control Points through configuring the Control Points page. Access
the Control Points page by selecting Settings > Control Points from the left navigation panel of the
web interface. The administrator assigns a previously created Profile to each of the various Control
Points. Control Points can be either assigned or requested. These methods are discussed in more detail
shortly.
Characteristics of Control Points
For each Control Point, only the Sources and Destinations that have been defined by its assigned
Profile will be available.
For a Control Point to work, it must meet these conditions:
• It must be authenticated, meaning that the Enabled check box is selected in the Control Points
window.
• It must have a Profile assigned to it.
If these conditions are not met, the browser window displays the message, “Control Point Disabled.”
Examples of Control Points
• Laptops
• Desktop computers
• iPads or other tablets using a web browser
• Smartphones
• External control using serial protocols