Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 30)

www.ensembledesigns.com Page 30
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
Assigning Shortcut Buttons
Assign Sources and Destinations to the nine shortcut buttons on the
front panel in order to streamline router operation. You can have any
combination of Source, Destination and Unassigned shortcut buttons.
This task can be done only from the BrightEye NXT front panel.
To assign the shortcut buttons:
1. Press the Configuration button. The top level menus display. The
top menu listed is Panel Config.
2. Press the right arrow button (or OK) to highlight the Shortcuts
submenu.
3. Press the right arrow button (or OK) to go to the Panel Config
shortcut button map.
4. Initially, the top left button is selected. Use the left and right arrow
buttons to select the button you want to configure.
5. Use the up and down arrow buttons to change which input, test
signal generator or output to which it is assigned. Or you can map
it to “Unassigned.”
6. Press OK to save your new selection to the highlighted shortcut
button.
7. Press the Configuration button to back out of the menu one
level at a time. Or wait approximately 30 seconds until the screen
automatically returns to Operational mode.