Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 53)

www.ensembledesigns.com Page 53
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
To Configure the TSG Slate
1. Press the Configuration button. The top level menus display.
2. Use the up or down arrow buttons to select the top level menu for
TSG1 or TSG2.
3. Press the right arrow button (or OK) to access the TSG submenus.
4. Use the up or down arrow buttons to highlight the Slate submenu.
5. Press the right arrow button (or OK) to access the Slate On/Off
selection submenu.
6. Press the up or down arrow buttons to select On or Off.
7. Press OK to set your Slate On/Off selection, or press the
Configuration button to cancel your selection.
8. Press the Configuration button to back out of the menu one
level at a time. Or wait approximately 30 seconds until the screen
automatically returns to Operational mode.
To Configure the TSG Slate Text
1. Press the Configuration button. The top level menus display.
2. Use the up or down arrow buttons to select the top level menu for
TSG1 or TSG2.
3. Press the right arrow button (or OK) to access the TSG submenus.
4. Use the up or down arrow buttons to highlight the Slate Text
submenu.
5. Press the right arrow button (or OK) to access the Slate Text
configuration keyboard.
6. Use the up, down, left and right arrow buttons to select one letter
at a time. Press OK to enter each letter, one at a time, into the text
field.
7. When you have finished entering the Slate Text, highlight “Set” on
the Slate Text configuration keyboard, then press OK to save your
changes.
8. Press the Configuration button to back out of the menu one
level at a time. Or wait approximately 30 seconds until the screen
automatically returns to Operational mode.