Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 29)

www.ensembledesigns.com Page 29
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
Menus Accessed from the Web Interface
General Modify the name of the unit. Access
reporting information about model, software
version and serial number. Enable password
requirement or change the password.
Network Change the router’s IP address and other
network settings
Timing & Genlock Select between external and internal
reference, get info about the system frame
rate (determined by TSG1)
Ports Name Sources and Destinations, define ports
as inputs or outputs as needed
Test Signals Select test signals, choose standards, adjust
test signal output timing
Clean Switches Set the standards for both clean switches.
Assign them to outputs, choose audio
breakaway settings. 410 and 430 units only.
Salvos Configure Salvos, enabling you to route a
selected set of sources to a selected set of
destinations simultaneously.
Profiles Create, edit and delete profiles
Control Points Enable control points, assign profiles to
control points
External Control Enable TCP/IP control, select a protocol,
assign a profile
Accessing the web interface
configuration menus