Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 24)

www.ensembledesigns.com Page 24
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
Chapter 3: Installation
In this Chapter
This chapter describes cable connections for the installation process. Topics addressed include:
• Connecting Cables to Ports
• Connecting a Reference If Needed
• Connecting the Power Supply
• Connecting Ethernet for Web Control Point (Optional)
Connecting Cables to Ports
Make your connections to sources and destinations with 75 ohm coaxial cable. The BrightEye NXT 410
accepts HDMI connectors.
Connecting a Reference If Needed
The BrightEye NXT locks to house reference or to its own internal precision standard. Connect your
reference source to the Ref In SDI port on the rear panel. The BrightEye NXT detects and reports ... If no
reference is connected, the router locks to its own internal precision standard.
The reference input of the BrightEye NXT will accept these reference types:
• NTSC or PAL analog video
• Tri-Level Sync
• 10 MHz precision reference
When VITC (Vertical Interval Timecode) is present on NTSC or PAL analog composite reference sources,
it will be available to the Router for event scheduling.
See Setting Up Timing and Genlock on page 48 for more details about configuring the Router’s
Timing and Genlock systems.