To assign a clean switch to a destination, To set the standard for clean switches – Ensemble Designs BrightEye NXT 410 Clean HDMI Router User Manual
Page 46
www.ensembledesigns.com
Page 46
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
The web interface configuration controls for the Clean
Switches are as follows:
To Assign a Clean Switch to a Destina-
tion
Assign the Clean Switch to any of the Destinations
(Output Ports) that have been configured in the Port
Configuration menu. Only the currently available
Destinations will be presented as choices in this
menu. Because only one CS can be assigned to any
given Destination, the list presented will not include
any ports that are already assigned to other Clean
Switches. In order to change assignments to move a
port from one CS to another CS, you must first release
the original assignment by selecting “Unassigned.”
Output 4 and Output 5 are the default Ports
available for Clean Switch assignment.
When you assign additional Ports as
Destinations, they become available for
Clean Switch assignment.
To Set the Standard for Clean Switches
Select the desired operating format and frame rate.
Only input signals matching that Standard will be
processed by the Clean Switch.
If a source in a different format is selected, the CS will
be bypassed and the source will be switched to the
output without any processing.