Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 75)

www.ensembledesigns.com Page 75
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
Setting Up Salvos
Salvos enable you to route a selected set of sources to a selected set of destinations simultaneously.
Salvos provide an efficient method for switching among multiple sets of routing configurations with
one click. You can configure and save up to eight Salvo configurations.
A single Salvo can include mixes with various duration times, direct takes, audio level adjustments and
audio channel mapping settings among multiple sources and destinations.
For example, in a situation in which you need to have several different on-stage monitor
configurations for a number of different uses, with Salvos set up and configured in advance, you can
very efficiently switch from one multiple monitor arrangement to another.
The two methods of creating a Salvo described below are similar. The key difference is that with the
first method, you start by routing all the sources you need to all the destinations in advance. Once all
that is in place, you capture the whole routing configuration by clicking Capture Current Routes from
the Salvos Editing page. If you use the second method, you determine which sources are going to
which destinations from the Salvos Editing page.
To Create a Salvo
First Method
1. From the left navigation panel, click Salvos. The Salvos page displays.