Ensemble Designs BrightEye NXT 410 Clean HDMI Router - Manual (Page 84)

www.ensembledesigns.com Page 84
BrightEye NXT 410/415/430 Compact Router Installation, Configuration and Operations Guide
Disabling the Front Panel for Safe Driving Mode
If you will be using the BrightEye NXT router while driving a vehicle,
you can put the front panel screen into “safe driving mode,” meaning
that it will not display live video. Instead, it will display the message
“Live Video Display Muted.”
To Enter Safe Driving Mode
1. Press the Configuration button. The top level menus display.
2. Use the up or down arrow buttons to select the top level menu for
Panel Config.
3. Press the right arrow button (or OK) to access the Panel Config
submenus.
4. Press the down arrow button repeatedly until the Live Video
Display submenu is highlighted.
5. Press the right arrow button (or OK) to access the next Live Video
Display submenu.
6. Press the up or down arrow to select either Live Video Muted or
Live Video On.
7. Press OK to set your selection, or press the Configuration button to
cancel your selection.
8. Press the Configuration button to back out of the menu one
level at a time. Or wait approximately 30 seconds until the screen
automatically returns to Operational mode.
Viewing Information about a Routed Signal
To view information about a signal that is already being routed to
a destination, press the green Shortcut button that corresponds
to the signal you want information about. The associated red
button illuminates to show which source is currently routed to that
destination.
Additionally, pressing the Right or Left arrow buttons brings up signal
metadata to the screen. The metadata includes horizontal and vertical
timing, signal frame rate and other signal metadata.