Extreme Networks BlackDiamond 8800 Series - Manual (Page 96)

Installing Power Supply Units in the BlackDiamond 8800 Series Switches
BlackDiamond 8800 Series Switches Hardware Installation Guide 96
Figure 53: Locking Handle on the 1200 W DC PSU
3 Carefully slide the 1200 W DC PSU all the way into the power supply bay (see Figure 54 ).
Be sure that the DC PSU is fully seated in the switch.
CAUTION
Do not slam the 1200 W DC PSU into the chassis backplane.
Figure 54: Installing the 1200 W DC PSU in the Power Supply Bay
4 Verify that the DC power is turned off at the source.
CAUTION
Always verify that the DC circuit is de-energized before you connect the input cable to the 1200 W DC PSU.
EX_130
Open
Lock
Yellow
lever
EX_131