Extreme Networks BlackDiamond 8800 Series - Manual (Page 129)

BlackDiamond 8806 AC Power Cord Retainer Channel
BlackDiamond 8800 Series Switches Hardware Installation Guide 129
3 Hold the AC power cord retainer channel as shown in Figure 83 .
Figure 83: BlackDiamond 8806 AC Power Cord Retainer Channel
4 Place the retainer channel against the switch as shown in Figure 84 . Tighten the captive screw at each
end of the channel.
Figure 84: Securing the BlackDiamond 8806 AC Power Cord Retainer Channel
5 Starting from the left, lay the first four power cords into the channel (see Figure 85 ).
6 Lay the last two power cords on top of the bottom four cords (see Figure 85 ).
EX_141 Captive screw
Captive screw
EX_139
Install and secure the channel bracket to
the switch by tightening both captive screws
Captive screw
Captive screw