Evaluating and meeting cable requirements, Cabling standards, Cable labeling and record keeping – Extreme Networks BlackDiamond 8800 Series User Manual
Page 60: Own in, Figure 30
Site Preparation
BlackDiamond 8800 Series Switches Hardware Installation Guide
60
Figure 30: Properly Secured Rack
Brace open equipment racks if the channel thickness is less than 1/4 inch (6.4 mm).
Evaluating and Meeting Cable Requirements
This section describes requirements for the cable you should use when installing your network
equipment. It includes:
●
●
Cable Labeling and Record Keeping
●
●
●
Cabling Standards
Extreme Networks recommends using the Building Industry Consulting Service International (BICSI)
Registered Communications Distribution Designer (RCDD), which is globally recognized as a standard
in site planning and cabling. For information, go to:
Cable Labeling and Record Keeping
A reliable cable labeling system is essential when planning and installing a network. Maintaining
accurate records helps you to:
●
Relocate devices easily.
●
Make changes quickly.
BD8800_brace