Extreme Networks BlackDiamond 8800 Series - Manual (Page 138)

Replacing BlackDiamond 8800 Series Chassis Components
BlackDiamond 8800 Series Switches Hardware Installation Guide 138
Figure 91: Removing the Fan Tray from the BlackDiamond 8810 Switch
Figure 92: Removing the Fan Tray from the BlackDiamond 8806 Switch
4 Use the fan tray handle to pull the fan tray half-way out from the fan tray slot. This action
disconnects the fan tray from the switch power.
Wait for the fan blades to stop turning before continuing with this procedure.
WARNING!
Be sure that all fan blade motion has ceased before continuing to remove the fan tray.
5 Support the bottom of the fan tray with your free hand as you use the handle to slide the fan tray
completely out from the fan tray slot.
ASP031A
Fan Tray
Handle
Fan Tray
Captive
Screws (x2)
EX_114
Fan tray
handle
Fan tray
captive
screws (x2)